Shopping Cart [more]
Index of Products
Information
- 9PTK Titration Instructional Videos
- Automatic Rinse Tank Controls
- Boiler and Cooling Towers
- Circuit Board Cleanliness Testing
- Deionized Water
- Environmental Applications
- Fountain Solutions
- Frequently Asked Questions
- Glossary of Terms
- Hemodialysis Applications
- Horticulture
- Hydroponics
- Material Safety Data Sheets
- Operation Manuals / Instructions
- Oxidation Reduction Potential (ORP)/Redox
- Pool and Spa
- Product Data Sheets
- Reverse Osmosis
- Technical Reference: Handheld pH Instruments
- Textile Manufacturing
Automatic Rinse Tank Controls
Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored.
Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer.
These factors have all encouraged many manufacturers and platers to invest in automatic rinse tank control systems. Many platers using automatic control systems for the first time are pleased to discover a reduction in water usage of up to 80%.
This water use reduction provides two major benefits:
1. LOWER WATER BILLS
The savings possible with Myron L automatic Rinse Tank CONTROLSTIK IITM Systems are illustrated in the following table. Figures are based on a 50% water reduction rate; the minimum that can usually be expected. Exact savings depend on several variables, including the type and frequency of work loads, rinse tank size, and type of contaminant.
2. WASTE TREATMENT SYSTEM INVESTMENT IS REDUCED.
The second major cost advantage of the CONTROLSTIK II System: Reducing the investment required for waste treatment equipment. Because less water is handled, smaller capacity treatment/recovery systems can be used to meet government water pollution regulations.
Generally, rinse water contamination is caused by chemicals being “dragged in” and salts that are dissolved from work being rinsed. These solutions ionize and can be measured and controlled by Electrical Conductivity (EC). EC measures both the total dissolved solids and the non-solid (e.g.: acid) contaminants, thereby giving the most correct method of control. As water contamination increases, so does the conductivity; the automatic rinse tank controls operate on this principle. When conductivity reaches the value selected as a control point, the water valve turns on to dilute the contamination. When the contaminates are reduced by the dilution, the conductivity falls and the water valve turns off.
The unit of measurement for conductivity is the micromho (microsiemens); Myron L systems are calibrated to this unit. Myron L Rinse Tank CONTROLSTIK II Systems can be used in either normal tap water or in Deionized (DI) water tanks. The dual range sensor can be set on either the 5-500 or the 500-5000 micromhos range. The AUTOMATIC RINSE TANK CONTROL is briefly described below. Myron L CONTROLSTIK II Systems consist of three components: Transformer Box, Controlstik Sensor, and Solenoid Valve.
Myron L CONTROLSTIK IITM SYSTEM SAVINGS
(Assuming 50% use reduction)
|
Monthly Water/Sewer Use (1 unit = 2907.2 liter/100 cu. ft.) |
||||||||
| Water/Sewer cost per unit |
600 units $ savings per |
1000 units $ savings per |
2000 units $ savings per |
5000 units $ savings per |
||||
| Month | Year | Month | Year | Month | Year | Month | Year | |
| $1.15 | $345 | $4,140 | $575 | $6,900 | $1,150 | $13,800 | $2,875 | $34,500 |
| $2.15 | $645 | $7,740 | $1.075 | $12,900 | $2,150 | $25,800 | $5,375 | $64,500 |
| $3.15 | $945 | $11,340 | $1,575 | $18,900 | $3,150 | $37,800 | $7,875 | $94,500 |
| $4.15 | $1,245 | $14,940 | $2,075 | $24,900 | $4,150 | $49,800 | $10,375 | $124,500 |
| $5.15 | $1,545 | $18,540 | $2,575 | $30,900 | $5,150 | $61,800 | $12,875 | $154,500 |
| $6.15 | $1,845 | $22,140 | $3,075 | $36,900 | $6,150 | $73,800 | $15,375 | $184,500 |
| $7.15 | $2,145 | $25,740 | $3,575 | $42,900 | $7,150 | $85,800 | $17,875 | $214,500 |
| $8.15 | $2,445 | $29,340 | $4,075 | $48,900 | $8,150 | $97,800 | $20,375 | $244,500 |
| $9.15 | $2,745 | $32,940 | $4,575 | $54,900 | $9,150 | $109,800 | $22,875 | $274,500 |
| $10.15 | $3,045 | $36,540 | $5,075 | $60,900 | $10,150 | $121,800 | $25,375 | $304,500 |
NOTE: 100 cubic feet of water is equivalent to 2831.5 liters/748 gallons.
AUTOMATIC RINSE TANK SYSTEM MODEL
| MODEL | FEATURES |
| 597 | Reliable solid state electronics in a heavy-duty, IP65/NEMA 4X Corrosion and water resistant transformer box enclosure. Suitable for any plating environment. System includes dual-range Controlstik Sensor and Solenoid Valve with adjustable flow control, manual override, anti-hammer closing, and conduit connector. |
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies.
**Prices, images and specifications subject to change without notice.**
For your convenience, we accept these credit cards:
